| 常用截面为圆形的长直钢纤维 |
| 添加时间：2023/10/16 14:30:52 浏览次数： |
| 冷轧带钢剪切法拉伸强度为600-900MPa、钢锭铣削法为700MPa；钢水冷凝法虽为380MPa，但是适合生产耐热纤维。为增强砂浆或混凝土而加入的、长度和直径在一定范围内的细钢丝。 The properties of steel fibers vary greatly according to different methods, such as the tensile strength of cold-drawn steel wire is 380-3000MPa, the tensile strength of cold-rolled strip steel by shearing method is 600-900MPa, the steel ingot milling method is 700 MPa, and the condensation method of molten steel is 380 MPa, but it is suitable for producing heat-resistant fibers. Fine steel wires of a certain length and diameter added to reinforce mortar or concrete. 常用截面为圆形的长直钢纤维，其长度为10～60毫米，直径为0.2～0.6毫米，长径比为30～100。为增加纤维和砂浆或混凝土的界面粘结，可选用各铜钟 一次性止血带 标志桩模具 钢丝轮 流水槽模具 防撞墙模具 检查井钢模具 不锈钢铸件 模锻件种异形的钢纤维，其截面有矩形、锯齿形、弯月形的；截面尺寸沿长度而交替变化的；波形的；圆圈状的；端部放大的或带弯钩的等。 The common section of long straight steel fibers is round. Its length is 10-60 mm, diameter is 0.2-0.6 mm, and the ratio of length to diameter is 30-100. In order to increase the interfacial bonding between fibers and mortar or concrete, various special-shaped steel fibers can be selected, with rectangular, zigzag and meniscus cross-sections; cross-section size alternating with length; waveform; circular; end enlarged or with hooks, etc |
| 上一页 冷轧带钢剪切法拉伸强度为600-900MPa、钢锭铣削法为700MPa |
| 下一页 随着钢纤维生产工艺的不断完善, |
Copyright © 技术支持：遨游网络