| 钢纤维投入搅拌注意要点 |
| 添加时间：2019/5/30 13:38:48 浏览次数： |
| 钢纤维掺和量 Steel fiber content 钢纤维投料： Steel fiber feeding: 1）钢纤维投料到输送混凝土：在搅拌站生产提前安排人员进行投料，本项目每方混凝土掺加20kg/m³。 1) Steel fiber feeding to concrete delivery: In the mixing plant production ahead of schedule for personnel to carry out the material, each side of the project concrete mixing 20 kg/m. 2）投入搅拌注意以下要点： 2) Attention should be paid to the following points when mixing: a、先将钢纤维及粗骨料投入拌和机搅拌30秒，使钢纤维分散在石子中，不结团。 A. First, the steel fibers and coarse aggregates are put into the mixer and stirred for 30 seconds, so geband.89ix.comgeyouchi.89ix.comguhuaji.89ix.comyapianji.89ix.compeidianz.89ix.comguanjiaw.89ix.co mthat the steel fibers are dispersed in the stones without agglomeration. b、再将砂及水泥投入拌和机干搅拌30秒。B. Put sand and cement into the mixer and mix dry for 30 seconds. c、再在转动着的搅拌机中加水，并使机子再搅拌3分钟左右 C. Add water to the rotating mixer and mix it for about 3 minutes. |
| 上一页 RPC材料减小了界面过渡区的厚度与范围 |
| 下一页 钢纤维砼表面湿润不少于7d |
Copyright © 技术支持：遨游网络