| 生产中怎样选择合适的钢纤维浇注料 |
| 添加时间：2019/5/18 15:10:37 浏览次数： |
| 不同的场合使用的钢纤维浇注料也不一样，小编为您总结一下在预热器、分解炉、回转窑等设备中应选择哪些浇注料最合适。 The steel fiber castables used in different occasions are also different, Xiaobian summarizes for you which castables should be selected in the preheater, decomposition furnace, rotary kiln and other equipment. 预热器由于使用温度较低，不需要很好很贵的浇注料，一般用较便宜的耐碱浇注料就可以了；分解炉由于生产中容易产生结皮堵料现象，我们建议用抗结皮浇注料；回转窑前后窑口部位的设备冲刷较强，一般用钢纤维浇注料、窑口浇注料，刚玉浇注料等；窑门罩的生产温度高，普通浇注料抵抗不了，一般选择高铝低水泥浇注料或钢纤维浇注料；喷煤管设备选择浇注料最严格，一般用刚玉浇注料或者专用的浇注料。 The preheater does not need very good and expensive castables because of its low temperature, so it is generally possible to use cheaper alkali-resistant castables; the decomposition furnace is prone to www.biansongqi.org.cn www.shidiaoshizi.net.cnwww.shidiaopaifang.cnwww.shidiaoniu.cncrust blockage in production, so we suggest using anti-crust castables; the equipment at the kiln entrance www.shidiaopailou.com.cnwww.shilangan.net.cnbefore and after the rotary kiln has strong erosion, generally using steel fiber castables, kiln entrance castables, corundum castables, etc. Production temperature is high, ordinary castables can not resist, generally choose high aluminium Low Cement Castables or steel fiber castables; coal injection pipe equipment selection castables is the most stringent, generally using corundum castables or special castables. 在选择浇注料时不仅要注重品牌，更重要的是看中质量，并且选择合适的浇注料使用在相应的设备上，这几点缺一不可。 When choosing castables, we should not only pay attention to the brand, but also to the quality, and choose the appropriate castables to use in the corresponding equipment. These points are indispensable. |
| 上一页 哪些条件影响了钢纤维的弯曲性 |
| 下一页 要提高钢纤维浇注料韧性有什么方法 |
Copyright © 技术支持：遨游网络