新闻动态
钢纤维混凝土具有与普通混凝土一样的搅拌
钢纤维混凝土具有与普通混凝土一样的搅拌、运转和施工性能,纤维在混凝土中不会结球,分布均匀,可在商品混凝土搅拌站进行生产并能用于泵送施工。铣削钢纤维混凝土的早期坍落度损失较大,30分钟损失32%,2小时损失42%。钢纤维混凝土的实际工作性优于相同的坍落度的普通混凝土。钢纤维混凝土具有良好的材料性能,与普通混凝土相比,其抗压强度提高2～20%；弯拉强度提高20～50%；劈裂抗拉强度提高20～40%；耐磨性能提高40%左右,其物理力理性能****可以满足城市道路工程及检查井盖等配套构件需求技术指标。钢纤维粗糙而洁净的表面,能与混凝定网站建设 伺服液位仪 防撞墙模具 唐山护栏 遮阳网 风电基础模具土中的水泥浆体牢固的结合,这是铣削钢纤维提高混凝土各种性能的根本原因。
Steel fiber reinforced concrete has the same mixing, operation, and construction performance as ordinary concrete. The fibers do not agglomerate in the concrete and are evenly distributed. It can be produced in commercial concrete mixing plants and used for pumping construction. The early slump loss of milled steel fiber reinforced concrete is significant, with a loss of 32% in 30 minutes and 42% in 2 hours. The actual workability of steel fiber reinforced concrete is better than that of ordinary concrete with the same slump. Steel fiber reinforced concrete has good material properties, and its compressive strength is increased by 2-20% compared to ordinary concrete; Increase bending and tensile strength by 20-50%; Increasing splitting tensile strength by 20-40%; The wear resistance is improved by about 40%, and its physical and mechanical properties can meet the technical requirements of supporting components such as urban road engineering and manhole covers. The rough and clean surface of steel fibers can firmly bond with the cement slurry in concrete, which is the fundamental reason for milling steel fibers to improve various properties of concrete.
Steel fiber reinforced concrete has the same mixing, operation, and construction performance as ordinary concrete. The fibers do not agglomerate in the concrete and are evenly distributed. It can be produced in commercial concrete mixing plants and used for pumping construction. The early slump loss of milled steel fiber reinforced concrete is significant, with a loss of 32% in 30 minutes and 42% in 2 hours. The actual workability of steel fiber reinforced concrete is better than that of ordinary concrete with the same slump. Steel fiber reinforced concrete has good material properties, and its compressive strength is increased by 2-20% compared to ordinary concrete; Increase bending and tensile strength by 20-50%; Increasing splitting tensile strength by 20-40%; The wear resistance is improved by about 40%, and its physical and mechanical properties can meet the technical requirements of supporting components such as urban road engineering and manhole covers. The rough and clean surface of steel fibers can firmly bond with the cement slurry in concrete, which is the fundamental reason for milling steel fibers to improve various properties of concrete.
