新闻动态
钢纤维种类划分
钢纤维问世的时间不长，但应用领域越来越广泛，与此相应，钢纤维的品种也再不断增多。
Steel fibers have not been available for a long time, but they are used more and more widely. Correspondingly, the variety of steel fibers is also increasing.www.Leaderhb.cnwww.shanghaijintong.cn
⒈按外形划分有：
_According to the shape, there are:
平直形钢纤维（a）、压棱形钢纤维（b)、波形钢纤维（c）、弯钩形钢纤维（d\e）、大头形钢纤维（f）、双尖形钢纤维（g）、集束钢纤维（h）等等。
Flat steel fibers (a), compressed prismatic steel fibers (b), corrugated steel fibers (c), hooked steel fibers (d e), large h e a D steel fibers (f), bicuspid steel fibers (g), cluster steel fibers (h) and so on.
2.按截面形状划分有：
2. According to the shape of cross-section, the following are classified:
圆形（a）、矩形（b）、槽型（c）、不规则性（d）
Circular (a), rectangular (b), groove (c), irregularity (d)
3.按生产工艺划分有：
3. According to the production process, there are:
切断钢纤维（用细钢丝切断）；
Cut off steel fibers (with fine steel wire);
剪切钢纤维（用薄钢板、带钢剪切）；
Shearing steel fibers (shearing with thin steel plates and strips);
铣削型钢纤维（用厚钢板或钢锭切削）；
Milling profiled steel fibers (cut with thick steel plates or ingots);
熔抽钢纤维（用熔融钢水抽制）。最有前途的是溶抽钢纤维，价格最低。
Melt-drawn steel fibers (made of molten steel). The most promising is the dissolving steel fiber, the lowest price.
4.按材质划分有：
4. According to the material quality, there are:
普碳钢纤维（抗拉强度一般在300~2500MPa）；
Plain carbon steel fibers (tensile strength is generally 300-2500 MPa);
不锈钢纤维（按材质有304,310,330,430,446等）；
Stainless steel fibers (304, 310, 330, 430, 446, etc.);
其他金属纤维（铝纤维、铜纤维、钛纤维以及合金纤维）。
Other metal fibers (aluminium fibers, copper fibers, titanium fibers and alloy fibers).
⒌按表面涂覆状态划分有：
(5) According to the state of surface coating, there are:
无涂覆层，表面涂环氧树脂，镀锌等。工业上大量使用的是无涂覆层的普通钢纤维。
No coating, epoxy resin, galvanizing, etc. Common steel fibers without coating are widely used in industry.
⒍按施工工艺分类有：
(5) According to the construction technology, there are:
喷射用、浇注用。
For injection and pouring.
⒎按直径尺寸分类有：
_According to the diameter and size, there are:
普通钢纤维（直径d>0.08mm）；
Common steel fibers (diameter d > 0.08mm);
超细钢纤维（直径d≤0.08mm）；
Ultrafine steel fibers (diameter d < 0.08mm);
超细钢纤维主要用于增强塑料及石棉摩擦材料。
Ultrafine steel fibers are mainly used for reinforcing plastics and asbestos friction materials.
Steel fibers have not been available for a long time, but they are used more and more widely. Correspondingly, the variety of steel fibers is also increasing.www.Leaderhb.cnwww.shanghaijintong.cn
⒈按外形划分有：
_According to the shape, there are:
平直形钢纤维（a）、压棱形钢纤维（b)、波形钢纤维（c）、弯钩形钢纤维（d\e）、大头形钢纤维（f）、双尖形钢纤维（g）、集束钢纤维（h）等等。
Flat steel fibers (a), compressed prismatic steel fibers (b), corrugated steel fibers (c), hooked steel fibers (d e), large h e a D steel fibers (f), bicuspid steel fibers (g), cluster steel fibers (h) and so on.
2.按截面形状划分有：
2. According to the shape of cross-section, the following are classified:
圆形（a）、矩形（b）、槽型（c）、不规则性（d）
Circular (a), rectangular (b), groove (c), irregularity (d)
3.按生产工艺划分有：
3. According to the production process, there are:
切断钢纤维（用细钢丝切断）；
Cut off steel fibers (with fine steel wire);
剪切钢纤维（用薄钢板、带钢剪切）；
Shearing steel fibers (shearing with thin steel plates and strips);
铣削型钢纤维（用厚钢板或钢锭切削）；
Milling profiled steel fibers (cut with thick steel plates or ingots);
熔抽钢纤维（用熔融钢水抽制）。最有前途的是溶抽钢纤维，价格最低。
Melt-drawn steel fibers (made of molten steel). The most promising is the dissolving steel fiber, the lowest price.
4.按材质划分有：
4. According to the material quality, there are:
普碳钢纤维（抗拉强度一般在300~2500MPa）；
Plain carbon steel fibers (tensile strength is generally 300-2500 MPa);
不锈钢纤维（按材质有304,310,330,430,446等）；
Stainless steel fibers (304, 310, 330, 430, 446, etc.);
其他金属纤维（铝纤维、铜纤维、钛纤维以及合金纤维）。
Other metal fibers (aluminium fibers, copper fibers, titanium fibers and alloy fibers).
⒌按表面涂覆状态划分有：
(5) According to the state of surface coating, there are:
无涂覆层，表面涂环氧树脂，镀锌等。工业上大量使用的是无涂覆层的普通钢纤维。
No coating, epoxy resin, galvanizing, etc. Common steel fibers without coating are widely used in industry.
⒍按施工工艺分类有：
(5) According to the construction technology, there are:
喷射用、浇注用。
For injection and pouring.
⒎按直径尺寸分类有：
_According to the diameter and size, there are:
普通钢纤维（直径d>0.08mm）；
Common steel fibers (diameter d > 0.08mm);
超细钢纤维（直径d≤0.08mm）；
Ultrafine steel fibers (diameter d < 0.08mm);
超细钢纤维主要用于增强塑料及石棉摩擦材料。
Ultrafine steel fibers are mainly used for reinforcing plastics and asbestos friction materials.
